Note:
*8000Pa: The fan blower of Xiaomi Robot Vacuum X20 Max generates up to 8000Pa of air pressure. Data comes from Xiaomi Internal Labs. Suction power may vary depending on test environments.
*Test condition of 8000Pa: Make sure the robot vacuum is fully charged. The suction of the fan blower was measured up to 8000Pa using a vacuum degree tester with a range of 0–20000Pa and an accuracy of 0.01kPa. Data comes from Xiaomi Internal Labs. Suction power may vary on different test environments.
*Actual cleaning efficiency will depend on the actual usage scenario.
*2mm: The robot vacuum is set to Vacuuming and Mopping mode and the Mop Swing is turned on for straight-line running test along a dusted wall. The distance of dust from the edge after mopping is measured and the minimum distance is ≤ 2mm. Data comes from Xiaomi Internal Labs. Actual results may vary.
*40mm: In standard test enviroment, the horizontal movement distance of the mop pad is measured after extension. The distance is about 40mm. Data comes from Xiaomi Internal Labs. Actual results may vary.
*3 hours hot air drying: The drying temperature, drying time, drying rate, etc. are tested in the environment of 25°C and 55%RH. Result shows that the mop drying rate is above 99% after 3 hours of continuous drying. Data comes from Xiaomi Internal Labs. Actual results may vary depending on different voltages and using scenarios.
*≤50db: Data comes from Xiaomi Internal Labs. Actual results may vary.
Reviews
There are no reviews yet.